top of page
ACRYLIC
acrylic cast or extruded
MANUFACTURING PROCESSES OFFERED
CNC MACHINING
LASER CUTTING up to 1/4" thick
UV PRINTING
ENGRAVING
HEAT BENDING
ASSEMBLY
Countersink Specs | Values3 |
|---|---|
Min countersink part size | 1" x 4" |
Max countersink part size | 14" x 46" |
Countersink Min Minor | 0.130" |
Countersink Max Major | 0.472" |
Countersink Min Hole Center to Material Edge | 0.361" |
Properties | Value |
|---|---|
Advertised Thickness | 0.125" |
Gauge | N/A |
Thickness tolerance positive | 0.007" |
Thickness tolerance negative | 0.006" |
Top/Bottom Finish | Textured top side, smooth bottom |
Sourced from | Canada |
General Details
Properties 2 | Value2 |
|---|---|
Cutting process | CNC Router |
Cut tolerance +/- | 0.005" |
Flatness tolerance before cutting | +/- 0.030" per foot |
Min part size | 1" x 2" |
Max part size | 44" x 30" |
Min hole size | 0.125" |
Min bridge size | 0.125" |
Min hole to edge distance | 0.38" |
Tab and slot Tolerance | 0.015" |
Countersink Specs | Values3 |
|---|---|
Min countersink part size | 1" x 4" |
Max countersink part size | 14" x 46" |
Countersink Min Minor | 0.130" |
Countersink Max Major | 0.472" |
Countersink Min Hole Center to Material Edge | 0.361" |
Countersink Specifications
Tapping Specs | Value4 |
|---|---|
Largest Tap | M10 x 1.5 |
Smallest Tap | M4 x 0.7 |
Min Flat Part Size Tapping | 0.949" x 1.5" |
Max Flat Part Size Tapping | 36" x 46" |
Tapping Min Hole to Edge | 0.063" |
Tapping Min Hole Center to Material Edge | Tap hole size/2 +0.063" |
ABS Properties | Value5 |
|---|---|
Material Composition | Acrylonitrile Butadiene Styrene
|
Density | 65.664 lb/ft^3 |
Heat treatment process | N/A |
ASTM | D4673 |
Tensile Strength (Ultimate) | 4.5 ksi |
Tensile Strength (Yield) | 3.5 ksi |
Shear Strength | 2 ksi |
Shear Modulus | 75 ksi |
Fatigue Strength | 2 ksi |
Izod Impact Strength | 6.3 ft-lbs/in |
Coefficient of Friction | 0.19 – 0.21 |
Rockwell | R 90 - R100 |
Elongation at Break | 25% |
Elastic Modulus | 340 ksi |
Poisson’s Ratio | .35 |
Thermal Conductivity | 0.22 BTU/h-ft °F |
Vicat Softening Temp | 150 °F |
Melting Point | 390 °F |
Magnetic | No |
Does it Rust | No |
ABS Properties
Tapping Specifications
CNC Router Cutting Specifications
CHARACTERISTICS
Low flammability
High weather resistance
Lightweight, coming in a wide variety of colours, textures, transparencies, and thicknesses
Highly versatile and great for prototyping, POS displays, signage, awards, DIY/home decor, and electronic housing
A great alternative to glass and easy to clean
High UV light resistance
DISADVANTAGES
Not fire resistant and food grade applications are not advised
Low abrasion resistance
Low impact resistance - dependent on material thickness
Difficult to repair
PRODUCT AND INDUSTRY APPLICATIONS
Signage, corporate, art, DIY, POS, Prototyping, electronics
bottom of page